Control valves
Industrial valves for precise control of the flow rate, pressure and temperature of process media in petrochemical, oil and gas, power generation and process plants.
Control valve types
The choice of design depends on the required flow capacity, control characteristic, pressure differential and process layout.
Single-seat
Precise control and tight shut-off of the flow. Linear, equal-percentage and on/off characteristics are available.
Double-seat
Versions for increased flow capacity and reduced actuator force at high pressure differentials.
Three-way
Mixing or diverting of flows in heat exchange, circulation and automatic process media control systems.
Main specifications
Basic series parameters. The specific version and materials are confirmed according to the process medium and the operating conditions.
Valve
- Type
- Single-seat, double-seat, three-way
- Nominal bore
- DN 15–300 / 1/2–12 inches
- Nominal pressure
- PN 16–160 / Class 150–900
- Face-to-face dimensions
- EN 558, ANSI B16.10
- Connection
- Flanged or butt-weld
- Body material
- W.Nr. 1.0619, 1.4581, 1.4408, 1.7357; other materials on request
- Bonnet material
- W.Nr. 1.0619, 1.4581, 1.4408, 1.7357
- Stem material
- W.Nr. 1.4057, 1.4301, 1.4571
- Packing
- Graphite, PTFE and combined versions
Plug and seat
- Plug material
- W.Nr. 1.4571, 1.4301; versions with stellite or PTFE
- Characteristic
- Linear, equal-percentage, open/closed
- Seat material
- W.Nr. 1.4571, 1.4301; versions with stellite
- Rangeability
- 1:50
- Stroke
- 15–90 mm depending on DN
- Kvs range
- 0,008–925 m³/h
- Permissible leakage
- Not more than 0,01 % Kvs
- Process media
- Aggressive and non-aggressive liquids, gases and steam
- Temperature
- Up to 400 °C depending on the materials of the version
Pneumatic
- Single-acting
- Normally open or normally closed version
- Diaphragm area: 300–830 cm², including the tandem version
- Control signal range: 0,2–2,4 bar
- Maximum supply pressure: 4 bar
Electric
- Rated force: 2 500–20 000 N
- Operating speed: 8–80 mm/min
- Stroke: 8–100 mm
- Power supply: 24, 48, 110 or 220 V
- Frequency: 50/60 Hz
Diagrams, charts and dimension tables
Open the required section. The image can be enlarged to full screen to view the designations and tables.
The calculation is based on the process medium parameters, the flow rate and the pressure differential. Once Kv has been determined, the nearest standard Kvs value is selected.
Photo gallery
Control valves as part of industrial assemblies, manifolds and process flow control systems.
We will select a valve for your process parameters
Send the project input data. Our specialists will help determine the valve type, Kvs, materials, actuator and the set of additional equipment.
