G100 · Series 110 · Type 113
High-pressure regulator type 113
G100Type 113
Model data
Application and specifications
Application
Reduces the inlet gas pressure and automatically maintains the specified outlet pressure. The required version is selected according to the process medium, flow rate, and inlet and outlet pressure ranges.
Installation and operation
The regulator must operate on clean gas. A strainer is installed upstream of the regulator. Installation is horizontal; the standard flow direction is right to left.
Main parametersType 113
- Working / inlet pressure
- p1 = max 100 (160) bar (KGF/CM²)
- Outlet pressure
- p2 = 2 ÷ 22 bar (KGF/CM²)
- DN / size
- G1/4" - G1/2" PN100/160
- Temperature
- U and KhL (down to - 60 °C)
Materials
| Body | 40Х steel |
|---|---|
| Seat | 12Х18Н10Т steel |
| Seat plug | ЛС59-3 |
| Spring / setting spring | 50ХФА steel |
| Adjusting screw | 10кп steel |
| Diaphragm | Effbe |
| Piston | X5CrNi18-10 |
| Cap | plastic |
Dimensions and accuracy class
| G1 / G2 | G 1/4″ or G 1/2″ |
|---|---|
| A / B / C | 80 / 401 / 187 mm |
| p₂ range | 2-22 bar |
| RG / ZG | 5 / 10 |
Technical documentation
Documentation and technical sheets
Open the technical data sheet and drawings at full size or download the PDF.
DocumentationTechnical data sheet: High-pressure regulator type 113Product specifications, available versions and overall dimensions.
Engineering selection
We will select Type 113 to match your system parameters
Provide the process medium, pressure, flow rate, temperature and connection — our specialists will check whether the version is applicable.
- We will verify compliance with the working parameters
- We will confirm the climatic and material version
- We will prepare a proposal and documentation
Contact
Send a request