G100 · Series 110 · Type 114
High-pressure regulator type 114
G100Type 114
Model data
Application and specifications
Application
Reduces the inlet gas pressure and automatically maintains the specified outlet pressure. The required version is selected according to the process medium, flow rate, and inlet and outlet pressure ranges.
Installation and operation
The inlet and outlet connections are threaded. The cleanliness of the pipeline section is checked before installation. The impulse port is connected to the outlet pipe; a version with an internal impulse connection is available.
Main parametersType 114
- Working / inlet pressure
- p1 = max 250
- Outlet pressure
- p2 = 3 ÷ 30 bar
- DN / size
- G1/4" - G3/4" PN25, G3/4"- G1" PN250
- Temperature
- down to -60 °C
- Connection type
- The inlet and outlet connections are threaded
Connection and overall dimensions
| DN 15 | G1 1/2″; G2 3/4″; ØA 108 mm; B 200 mm; C 380 mm; L 245 mm |
|---|---|
| DN 20 | G1 3/4″; G2 1″; ØA 108 mm; B 200 mm; C 380 mm; L 245 mm |
| Impulse port | G 1/4″; connected to the outlet pipe |
| Internal impulse connection | available; capacity approximately 30% lower |
Adjustment characteristics
| Stroke 7,5 mm | KG 30 mm |
|---|---|
| Stroke 10 mm | KG 60 mm |
| KG | regulator setting coefficient |
| Standard | SRPS EN 334 |
Technical documentation
Documentation and technical sheets
Open the technical data sheet and drawings at full size or download the PDF.
DocumentationTechnical data sheet: High-pressure regulator type 114Product specifications, available versions and overall dimensions.
Engineering selection
We will select Type 114 to match your system parameters
Provide the process medium, pressure, flow rate, temperature and connection — our specialists will check whether the version is applicable.
- We will verify compliance with the working parameters
- We will confirm the climatic and material version
- We will prepare a proposal and documentation
Contact
Send a request