Skip to content
Shut-off and control valves

Three-piece ball valves

Serviceable industrial ball valves for fast flow shut-off. The modular design simplifies maintenance, seal replacement and adaptation of the valve to threaded, welded or flanged connections.

DN 15–200nominal bore
PN 16–40nominal pressure
up to +200 °Cwith PTFE seals
EN 12266-1leak tightness testing
Technical data
Weld endsThreadedFlangedFull and reduced bore
Three-piece flanged ball valve
Three-piece threaded ball valve
Group of three-piece ball valves
Red flanged ball valve
Connection options

Main designs

The design is selected according to the pipeline, the process medium, the required bore and the maintenance conditions.

↔

Weld ends

A removable centre body with welded end pieces. Maintenance is carried out without removing the connecting parts.

≋

Threaded

A compact design for small and medium diameter process lines that retains the removable centre section.

◉

Flanged, full bore

Minimum hydraulic losses and a bore close to the inside diameter of the pipeline.

⊙

Flanged, reduced bore

A compact design for processes where a reduced bore is permissible by calculation.

Technical parameters

Design and specifications

Pressure ratings, dimensions and materials are confirmed for the specific type, diameter and operating conditions.

01

Design

Type
Three-piece serviceable ball valve
Actuation
90° handle turn or actuator mounting
Bore
Full or reduced
Connection
Weld ends, threaded or flanged
Maintenance
The centre body is removed after loosening the tie bolts
Dimensions
Flanged designs to EN 558
Flanges
To EN 1092-1
Testing
Leak tightness testing to EN 12266-1
02

Materials

Body
W.Nr. 1.4581 (1.4571) or W.Nr. 1.0619 (1.1151)
Ball
W.Nr. 1.4571 or W.Nr. 1.4057
Ball seat
PTFE with glass fibre filler
Body seal
PTFE
Stem
W.Nr. 1.4571 or W.Nr. 1.4057
Labyrinth seal
PTFE
Temperature
Up to +200 °C depending on the design
Process media
Liquids and gases, including aggressive media subject to material approval
01

Fast maintenance

The centre section can be removed to replace the seals while the connecting parts remain in the pipeline.

02

Automation

A pneumatic actuator or a single-acting or double-acting rotary cylinder can be fitted.

03

Temperature control

Selected flanged designs can be supplied with a jacket for heating or cooling the process medium.

Chemical industryPetrochemicalsPower generationPharmaceuticalsFood industry
Engineering data

Diagrams, charts and dimension tables

Open the design you need. The image can be enlarged to view materials, designations and dimensions.

The permissible working pressure depends on the nominal bore, the temperature and the seal materials used.

Engineering support

We will select a valve to match your process parameters

Send us the input data. Our specialists will help you choose the design, materials, bore type, connection and automation option.